Private Access
Français English Deutsch Español Türkçe Português Italiano Русский - Russian 中文 - Chinese

Belts for tensionless dryers

Tensionless dryer beltThe Dollfus & Muller open mesh conveyor belts are used to dry, to shrink and to stabilize the fabric in tensionless & relax dryers.

The fabric, which has been stressed during earlier processes (knitting, dyeing & squeezing), needs to be relaxed. This is usually achieved by agitating the fabric between two belts, either by hot air (between 150 & 180°C/ 300 & 350°F) or other mechanical means.

Nomex belts, PTFE-coated fibreglass belts, PTFE belts, Kevlar belts, Ryton belts, PEEK belts are available for relax dryers ; Dollfus & Muller has the widest range of dryer conveyors worldwide.

Dollfus & Muller open mesh textile conveyor belts allow an optimal drying and are of high dimensional stability specialy for the wider width. Specific dryer belt constructions have been developed to avoid any marking for very sensitive fabrics such as low-weighted knitted fabrics or silk. As well, Dollfus & Muller has the strongest dryer belts available in order to be long lasting even with very old machines.

These net conveyor belts are used on the following machines : Santex, Monforts, Tube-Tex, Brückner, Fab Con, LK&LH, Babcock, Albrecht, Krantz, Ruckh, Harish, Swastik, Fong’s, I Kuang, Hung Jyi, Ssang Ho, Il Sung, Dong Nam, Dilmenler, Heliot, Obermaier, Salvadé, Strahm, …

 

BELTS FOR RELAX DRYERS AND COMPACTING MACHINES
Belt position Belt types Max working T° Description Recommended belts  Characteristics
 Insight Quality Composition Air Flow :
CFM under 124 Pa
Abrasion
resistance
Relax dryer :
inside
Rigid 260°C
500°F
Most popular smooth quality
4x4 mm mesh
 TAMIP GT 40 TAMIP
GT 40
Fibreglass
coated with Teflon®
1900 --
Relax dryer :
inside
Rigid 260°C
500°F
Smooth quality 4x4 mm mesh
reinforced by a Double Weft
 TAMIP GT 40 DW TAMIP
GT 40 DW
Fibreglass
coated with Teflon®
1700 --
Relax dryer :
inside
Rigid 190°C
370°F
Original for Santex dryers. Smooth
and stable quality for high tension
 4x4 mm mesh
TAMIP KGT 40 TAMIP
KGT 40
Kevlar® / Fibreglass
coated with Teflon®
1710 --
Relax dryer :
inside
Rigid 190°C
370°F
Original for old Obermaier dryers.
Smooth quality
4x4 mm mesh
TAMIP KT 40 TAMIP
KT 40
Kevlar® coated
with Teflon®
1500 --
Relax dryer :
inside
Flexible 180°C
350°F
Resistant quality for gas
and thermo-oil heated dryers
 TAMIP C 928 R ST TAMIP
C 928 R ST
PPS* / Nomex® 1500 ++
Relax dryer :
inside
Flexible 230°C
450°F
High temperature smooth resistant belt
recommended for very sensitive
thin fabrics

 TAMIP C 928 Z ST

TAMIP
C 928 Z ST
PEEK** / Nomex® 1550 +++
Relax dryer :
entrance
and exit
Rigid 260°C
500°F
Smooth quality
4x4 mm mesh
 TAMIP GT 40 TAMIP
GT 40
Fibreglass
coated with Teflon®
1900 --
Relax dryer :
entrance
and exit
Flexible 150°C
300°F
High grip needle-punched fibre surface
recommended for knitted fabrics holding
over inclined dryer entrances and exits

 

 TAMIP CA 928

TAMIP
CA 928  
100% Polyester 280 --
Relax dryer :
entrance
and exit
Flexible 180°C
350°F
High grip needle-punched fibre surface
recommended for knitted fabrics holding
over inclined dryer entrances and exits

 

 TAMIP CA 928 R

TAMIP
CA 928 R
PPS* / Nomex® 400 --
Compacting
machine :
exit
Rigid 260°C
500°F
For Albrecht compacting machines  TAMIP GT 40 TAMIP
GT 40
Fibreglass
coated with Teflon®
1900 --
Compacting
machine :
exit
Flexible 150°C
300°F
For Albrecht, Ruckh compacting machines  TAMIP C 928 TAMIP
C 928  
100% Polyester 1400 ++
Compacting
machine :
exit
Flexible 150°C
300°F
For Ferraro, Santex, Sperotto, Lafer,
 Lafer Türk compacting machines

 TAMIP Multiclip 80

TAMIP
Multiclip 80
100% Polyester 1100 +

>*PPS : Polyphenylsulfurate            
**PEEK : polyetheretherketone            
- None    + Medium    ++ Strong     +++ Very strong

Teflon®, Kevlar® and Nomex®  are DuPont de Nemours registered trademarks

The Dollfus & Muller TAMIP GT 40 relax dryer conveyor