Private Access
Quote request
Setting out felts for after dyeing
Setting out felts for 4 or 5 cylinders through feed setting out machines
During this process, the hide is conveyed on blades fitted cylinders which stretches and smoothen the hide before going through two felts which are removing the moisture excess. The continuous setting out machines also called through feed setting out machines, have in most cases 4 pressure cylinders, Dollfus & Muller manufactures the MVC4 felts, PRC4 felts as well as the PCR 4 felts.
Dollfus & Muller setting out felts have a special surface treatment which optimizes the stretching effect.
These continuous setting out felts are used on the following machines : Bauce MVC 4, MVC 4 Versus and PRC4, Escomar PCR4, ROTOPIA setting out GIGAPRESS.
| Type of leather | Production | Process | Type of machine | Recommended felt | Characteristics | ||||
|---|---|---|---|---|---|---|---|---|---|
| Composition | Weight (g/m²) | Thickness (mm) | Water permeability l/h/10 cm² (under 2 bars of water pressure) | Lifetime | |||||
|
All types
|
Automotive, upholstery, shoes, gloves, bags, garments |
After dyeing | 5 pressure cylinders machines | SETO S 95 | 100% synthetic | 9500 | 18 | 350 | ++++ |
| All types | Automotive, upholstery, shoes, gloves, bags, garments |
After dyeing | 4 pressure cylinders machines | SETO S 85 | 100% synthetic | 8500 | 17 | 300 | ++++ |