The DOLLFUS & MULLER conveyor belts are used in the thermo-bonding non-woven process.
This process bonds the fibres together in order to create a pad of fibres which is used afterwards in bed furnishing, winter clothes ,…
This process requires high temperature (150 up to 200°C / 300 up to 380°F) which melts the fibres together. This process uses two belts which create pressure on the pad. The process itself has two stages : the high temperature stage to bond the fibres and a cooling chamber at the end of the process (50°C / 100°F) in order to fix the fibres. These conveyor belts are used on the following machines : Santex, Fleissner, Schott & Meissner, Aztec, Bombi,…
| Quality | Composition
(Wa = warp / We = weft) | Maximum working T°
(in continuous operation) | Permeability
(CFM: Cubic Feet/Min.)
under 124 Pa | Insight | TAMIP GT 40
(PTFE coated) | Wa : Teflon® coated fibreglass
We : Teflon® coated fibreglass | 260°C/500°F | 1900 ± 100 |  | TAMIP GT 20
(PTFE coated) | Wa : Teflon® coated fibreglass
We : Teflon® coated fibreglass | 260°C/500°F | 1150 ± 35 |  | TAMIP C 498 Z
(smooth and flexible woven) | Wa : PEEK Monofilament
We : PEEK Monofilament | 230°C / 450°F | 1300 ± 100 |  | TAMIP Multiclip 80 R
(spiraled) | PPS Monofilament | 180°C/350°F | 1200 ± 100 |  | TAMIP Multiclip 60 R
(spiraled) | PPS Monofilament | 180°C/350°F | 1100 ± 60 |  | TAMIP C 183 R
(double layer) | Wa : PPS Monofilament
We : PPS Monofilament | 180°C/350°F | 780 ± 40 |  | TAMIP C 498 R
(double layer) | Wa : PPS Monofilament
We : PPS Monofilament | 180°C/350°F | 1100 ± 55 |  | TAMIP C 125 C
(double layer) | Wa : PET Monofilament
We : PET Monofilament | 150°C / 300°F | 120 ± 10 |  |
Teflon® is a registered trade mark from Dupont de Nemours |
