Private Access
Quote request
Belts for tensionless dryers
The Dollfus & Muller open mesh conveyor belts are used to dry, to shrink and to stabilize the fabric in tensionless & relax dryers.
The fabric, which has been stressed during earlier processes (knitting, dyeing & squeezing), needs to be relaxed. This is usually achieved by agitating the fabric between two belts, either by hot air (between 150 & 180°C/ 300 & 350°F) or other mechanical means.
Nomex belts, PTFE-coated fibreglass belts, PTFE belts, Kevlar belts, Ryton belts, PEEK belts are available for relax dryers ; Dollfus & Muller has the widest range of dryer conveyors worldwide.
Dollfus & Muller open mesh textile conveyor belts allow an optimal drying and are of high dimensional stability specialy for the wider width. Specific dryer belt constructions have been developed to avoid any marking for very sensitive fabrics such as low-weighted knitted fabrics or silk. As well, Dollfus & Muller has the strongest dryer belts available in order to be long lasting even with very old machines.
These net conveyor belts are used on the following machines : Santex, Monforts, Tube-Tex, Brückner, Fab Con, LK&LH, Babcock, Albrecht, Krantz, Ruckh, Harish, Swastik, Fong’s, I Kuang, Hung Jyi, Ssang Ho, Il Sung, Dong Nam, Dilmenler, Heliot, Obermaier, Salvadé, Strahm, …
| Belt position | Belt types | Max working T° | Description | Recommended belts | Characteristics | |||
|---|---|---|---|---|---|---|---|---|
| Insight | Quality | Composition | Air Flow : CFM under 124 Pa | Abrasion resistance |
||||
| Relax dryer : inside |
Rigid | 260°C 500°F |
Most popular smooth quality 4x4 mm mesh |
 |
TAMIP GT 40 |
Fibreglass coated with Teflon® |
1900 | -- |
| Relax dryer : inside |
Rigid | 260°C 500°F |
Smooth quality 4x4 mm mesh reinforced by a Double Weft |
 |
TAMIP GT 40 DW |
Fibreglass coated with Teflon® |
1700 | -- |
| Relax dryer : inside |
Rigid | 190°C 370°F |
Original for Santex dryers. Smooth and stable quality for high tension 4x4 mm mesh |
 |
TAMIP KGT 40 |
Kevlar® / Fibreglass coated with Teflon® |
1710 | -- |
| Relax dryer : inside |
Rigid | 190°C 370°F |
Original for old Obermaier dryers. Smooth quality 4x4 mm mesh |
 |
TAMIP KT 40 |
Kevlar® coated with Teflon® |
1500 | -- |
| Relax dryer : inside |
Flexible | 180°C 350°F |
Resistant quality for gas and thermo-oil heated dryers |
 |
TAMIP C 928 R ST |
PPS* / Aramid | 1500 | ++ |
| Relax dryer : inside |
Flexible | 230°C 450°F |
High temperature smooth resistant belt recommended for very sensitive thin fabrics |
|
TAMIP C 928 Z ST |
PEEK** / Aramid | 1550 | +++ |
| Relax dryer : entrance and exit |
Rigid | 260°C 500°F |
Smooth quality 4x4 mm mesh |
|
TAMIP GT 40 |
Fibreglass coated with Teflon® |
1900 | -- |
| Relax dryer : entrance and exit |
Flexible | 150°C 300°F |
High grip needle-punched fibre surface recommended for knitted fabrics holding over inclined dryer entrances and exits |
|
TAMIP CA 928 |
100% Polyester | 280 | -- |
| Relax dryer : entrance and exit |
Flexible | 180°C 350°F |
High grip needle-punched fibre surface recommended for knitted fabrics holding over inclined dryer entrances and exits |
|
TAMIP CA 928 R |
PPS* / Aramid | 400 | -- |
| Compacting machine : exit |
Rigid | 260°C 500°F |
For Albrecht compacting machines | |
TAMIP GT 40 |
Fibreglass coated with Teflon® |
1900 | -- |
| Compacting machine : exit |
Flexible | 150°C 300°F |
For Albrecht, Ruckh compacting machines |  |
TAMIP C 928 |
100% Polyester | 1400 | ++ |
| Compacting machine : exit |
Flexible | 150°C 300°F |
For Ferraro, Santex, Sperotto, Lafer, Lafer Türk compacting machines |
|
TAMIP Multiclip 80 |
100% Polyester | 1100 | + |
>*PPS : Polyphenylsulfurate
**PEEK : polyetheretherketone
- None + Medium ++ Strong +++ Very strong
